Original price was: $46.50.$37.95Current price is: $37.95. inc. GST
In stock
Introducing the first in the 
range, starting with our 4S 120C 1500mAh LiPo Battery!
range, starting with our 4S 120C 1500mAh LiPo Battery!We heard the call, and have delivered with our high-performance 1500mAh 120C LiPo, featuring protective plates, removable balance lead & premium build quality!
|
Capacity |
1500mAh |
 |
|
Configuration |
4S1P |
|
|
Nominal Voltage |
14.8V |
|
|
Dimension |
35x33x80mm Appr. |
|
|
Weight |
180g (+/-1g) |
|
|
Max cont. discharge (C-rate/current) |
120C |
|
|
Max Burst (C-rate/current) |
240C |
|
|
Charge Connector |
Built-in molex |
|
|
Discharge Connector |
XT60 |
|
|
Working Temperature Charge |
0~45°C |
|
|
Working Temperature Discharge |
(-20~60°C) |
|
|
Working Humility |
65%RH +/-20% |
|
|
Storage Temperature |
(-20~35°C) |
|
|
Storage Humility |
65%RH +/-20% |
|
NOTE: Please do not choose express shipping unless you live in greater Melbourne as batteries cannot be shipped by Air.
Lipo Battery Safety
- Batteries should NEVER be left unattended while charging.
- Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
- Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo bag.
- Do not charge batteries near flammable items or liquids.
- Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
- Never charge inside an automobile even when parked.
- KEEP BATTERIES AWAY from children and pets at ALL times.
- Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
- Battery may explode if damaged or disposed of in fire
- Never leave batteries inside a car on a hot day or any other place where temperature may exceed 140F / 60C.
- Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
- Immediately discharge damaged batteries at 1/2 C rate and dispose
- Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
- Take care that the cells are not punctured, especially by metallic objects like hobby knives.
- If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.
| Weight | 0.19 g |
|---|---|
| Dimensions | 8 × 3.7 × 3.5 cm |
4 reviews for Lethal Power 1500mAh 4S 120c 14.8v
Only logged in customers who have purchased this product may leave a review.
Related products
quadstuff1 (verified owner) –
Awesome packs I have given these a good hiding still only a few cycles in them. It’s a great idea how the balance leads can be removed. Stops them going into the props. Will be slowly changing over to these. I now have 6 of these packs
lewi_day (verified owner) –
Great battery. Good weight for a 1500 and take a beating. Removable balance lead is the icing on the cake. Give them a shot, you won’t be disappointed
venville1982 (verified owner) –
Best batterys I have used, I have pushed these batterys to the limit and they keep bouncing back, great quality product, I recommend these to every one.
quadstuff1 (verified owner) –
Just an update on these packs after 2 years of punishment. I don’t balance charge I leave packs charged for weeks, Over discharge them, charge them at 5 Amp all the time and crash them I crash them a lot. if you are not crashing your not pushing. I do all the things that you are told not to. So I finally killed a pack don’t get me wrong I have crashed packs into the next life but even then they take much more of a beating than any other pack I have had. Two cells went was after a crash. so I did what your not supposed to do and pulled it apart. These packs are built to last the outside of the packs have really good quality heat shrink not paper thin like you get on some packs. Both sides have .4mm aluminum protection plate stuck on them. Between the cells at the top they have 3 hard silicon packers about 8x6mm to separate each cell connection. On the top side of the pack covering the balance lead/plug they have a high density foam. Then the balance lead/plug set up is the neatest you will ever see inside a pack. Clean good solder joints with good size wires.
Why did this pack fail I don’t know but it has been never looked after and treated as a throw away item. That’s just how I fly stuff gets broken. But as far as a pack goes sign me up I will be getting more in the future. Defiantly worth the wait and money.
Just my tear down review of the pack.
Shut up and take my money.